ZMTE is the hydraulic hose and fitting line supplied by Win Auto Parts for industrial and mobile fluid power work. This article introduces the range and points to the technical guides that cover selection, identification and safe assembly.
ZMTE သည် Win Auto Parts မှ ဖြန့်ဖြူးသော hydraulic hose နှင့် fitting အမှတ်တံဆိပ် ဖြစ်သည်။
1. What the range covers — အမျိုးအစား
- Hydraulic hose, including wire spiral construction rated to 70 MPa
- 18 fitting types, covering the common international thread and seal standards
- Ready-made hose assemblies in common sizes, including 1/4 inch and 3/8 inch SAE 100R1
- Applications across 32 industrial sectors, from agriculture and construction through to oil and gas
2. Choosing a hose — Hose ရွေးချယ်ခြင်း
Four things decide which hose is correct: the working pressure of the system, the fluid being carried, the operating temperature, and the tightest bend the hose has to make in service. Getting any one of them wrong shortens hose life or causes a burst.
The technical guides below cover each of these in detail. Read them before specifying a hose for a new application.
ဖိအား၊ အရည်အမျိုးအစား၊ အပူချိန်နှင့် ကွေးနိုင်သော အချင်း လေးချက်ကို ကြည့်၍ ရွေးရသည်။
Never select a hydraulic hose by size alone Two hoses of the same inside diameter can have completely different pressure ratings depending on their reinforcement. A single wire braid hose fitted where a wire spiral hose was specified will burst. Always match the pressure rating, not just the bore and the fittings. အချင်းတူရုံဖြင့် မရွေးပါနှင့်။ ဖိအားခံနိုင်ရည် မတူပါက ပေါက်ကွဲနိုင်သည်။ |
Comments
Please sign in to leave a comment.