WBC Brake Pad – Product & Fitment Guide

Win Central Co.,Ltd.

Updated September 15, 2026 09:57

Article W02

WBC brake pads are the semi-metallic pad in the WBC range, built for heavy vehicles, trucks and towing work. This guide covers the friction compound, how it performs under heat and load, and which vehicles it fits.

WBC brake pad သည် semi-metallic ပက်ဒ် ဖြစ်ပြီး ကုန်တင်ကား၊ ထရပ်ကားနှင့် ဝန်ဆွဲအသုံးပြုမှုများအတွက် ထုတ်လုပ်ထားသည်။ အပူနှင့် ဝန်အောက်တွင် စွမ်းဆောင်ရည်ကို ဤတွင် ရှင်းပြထားသည်။

Cross-section of a brake pad showing backing plate, friction material, wear indicator and the minimum thickness line

Diagram: Brake pad in section. Measure only the friction material against the minimum thickness line — the backing plate is not part of the usable thickness.

ဘရိတ်ပက်ဒ် ဖြတ်ပိုင်းပုံ။ ပွတ်တိုက်အလွှာကိုသာ တိုင်းတာပါ — သံပြားခံ မပါဝင်ပါ။

Composition: 30%–70% metal alloys (steel, copper, iron) blended with graphite lubricant and friction modifiers

Performance: Excellent stopping power across wide temperature range — handles heavy loads and repeated hard braking

Best For: Trucks, SUVs, pickup trucks, commercial vans, Coaster buses — any vehicle carrying heavy loads

Rotor Wear: Slightly higher than ceramic — recommended to replace rotors at the same time if heavily worn

Dust Level: Moderate brake dust — more than ceramic but acceptable for most commercial applications

Includes: Anti-squeal shim included in every set — must be installed between pad backing and caliper piston. Reduces noise and vibration.

WBC Brake Pad သည် သတ္တုဓာတ်ပါဝင်သော Semi-Metallic ဖြစ်သောကြောင့် ကုန်တင်ကားများ၊ SUV များ၊ ကားကြီးများအတွက် အကောင်းဆုံးဖြစ်သည်

Heat Resistance: Withstands extreme heat — ideal for mountain roads, heavy towing, and Coaster/bus routes

Stopping Power: Maximum braking force — shorter stopping distances even when fully loaded

Cold Weather: Works effectively from cold start — no warm-up period required

Cost: Generally more affordable than ceramic — better value for commercial and heavy-duty use

Durability: Excellent wear resistance under heavy-duty conditions and frequent braking cycles

အလေးချိန်ကြီးသော ယာဉ်များ ဆောင်ရွက်ရာတွင် ထိရောက်မှုမြင့်မားပြီး ဈေးနှုန်းသက်သာသည်

	OEM Part No.	Compatible Vehicle	Position
D2052	04465-36010	Toyota Coaster (2000+)	Front
D2105	04466-28011	Toyota Camry / Estima Hybrid (1999–2006)	Rear
D2180	04465-20540	Toyota Highlander / Caldina (2000–2007)	Front
D2202	04465-42071	Toyota RAV4 (2000–2005)	Front
D2232	04465-48040	Toyota Land Cruiser / Harrier (2002+)	Front
D2249	04465-48100	Toyota Harrier / Lexus RX (2003+)	Front

	OEM Part No.	Compatible Vehicle	Position
D1148	44060-31U90	Nissan Cefiro / Maxima A33 (2001+)	Front
D1231	AY040-NS058	Nissan X-Trail / Cima (1999–2006)	Front
D1241	41060-40U95	Nissan Patrol Y61 (1998+)	Front
D1276	D1060-JD00A	Nissan X-Trail T31 (2008–2013)	Front

D3128

OEM Part No.: BPYK-33-23Z
Compatible Vehicle: Mazda 2, 3, 6 / Ford Focus, Kuga, EcoSport
Position: Front / Rear

D5056

OEM Part No.: 43022-SP0-020
Compatible Vehicle: Honda Civic / CR-V (1997–2002)
Position: Rear

D5066

OEM Part No.: 43022-SV4-020
Compatible Vehicle: Honda Accord (2000–2007)
Position: Rear

D7055

OEM Part No.: 26296-FE081
Compatible Vehicle: Subaru Outback / Legacy (2000–2009)
Position: Rear

D7064

OEM Part No.: 26696-AG010
Compatible Vehicle: Subaru Forester (2002–2008)
Position: Front

⚠ Installation Note: Always replace brake pads in AXLE SETS (both left and right). Never replace only one side.

Rotor Inspection: Check rotor thickness when replacing pads. Minimum thickness is stamped on the rotor edge.

Break-in Period: Perform 5–8 moderate stops from 50 km/h to bed-in new semi-metallic pads for optimal performance.

ဘရိတ်ပက်ဒ် လဲသောအခါ ဘယ်-ညာ နှစ်ဘက်လုံး တစ်ပြိုင်နက် လဲပါ

WBC Brake Pads — article 8 of 9

← Previous · WBC Brake Pad vs New WBC Brake Pad: Which Should You Choose?

Next → · WBC Brake Pads – Brand Overview

All 9 articles in WBC Brake Pads

Related to

wbc, brake-pad, semi-metallic, toyota, nissan, mazda, honda, subaru